Tuning Solution for DQ381 with 401 Bootloader
After extensive testing TuneZilla is proud to release our solution for DSG equipped MK8 R and GTI models with the "locked" 401 Bootloader. This is a physical hardware change. By removing the mechatronic unit and swapping to our pre-flashed bootloader, users can enjoy more features not available from the factory.
The TuneZilla Bootloader will come preloaded with the following features and adjustments:
Torque Limiters Set 800nm
Two Step Launch Control 3500rpm No Kickdown / 4000rpm With Kickdown
Faster Launch Control Take Off Reaction
Displaying Gear Number In D/S Mode
Sailing Mode Off In Economic Mode
Upshift Off In Manual Mode
Modified Clutch Thermal Management
Optimized Clutch Cooling
Increased Max Shift Points In D/S Mode (Around 200rpm)
Max Clutch Pressure Values Up To 18-19bar
Reduced Up/Down Shift Times
Removed Safeguards That Slow Down Vehicle Acceleration, Including TP (throttle plate ) Closure Above 6500rpm
Requires
Notes
Available For Mk8 R / Audi S3 8Y / Seat/Cupra 2.0 TSI
This product is available for purchase via Tickets. Our Calibration team will confirm your Transmission compatibility before preparing your Bootloader. We recommend an experience mechanic/shop perform the installation.
TuneZilla supplies a pre-flashed Bootloader only. The following additional parts may be required for installation.
9x N 105 540 02 - mechatronic TTY bolts
1x 0GC 927 377 - seal for mechatronic connector
1x 0GC 325 201 L - outer cover for mech with integrated seal
4x N 910 327 02 - bolts for outer cover
1x N 909 654 01 - drain bolt/seal for mech
1x N 043 809 2 - seal for DSG drain plug
1x 0GC 325 183 A - DQ381 Filter
1x N 910 845 01 - O-ring for filter housing
6x G 055 529 A2 - DSG Fluid