ECU tuning can be installed through the following methods
1) Purchase a flashzilla V3 from our website https://malonetuning.com/products/item/flashzilla-v3
2) Contact and book an appointment through a distributor https://malonetuning.com/dealers
3) Bench flashing: The ECU must be shipped in or tuned by a distributor with bench tools. This is not recommended as they can easily be tuned through the diagnostic port.
DSG tuning can be installed through a distributor, or we can send out a rental tool for 50 with a 1000 deposit. A windows 7 or newer laptop will be required. Please contact us for more info.
**Install instructions:**
Flashzilla V3
-
Download and install the flashzilla V3 software https://malonetuning.com/assets/files/SetupFlashZilla3.exe
- Plug the device into your obd port, go through the tuning menu and select your ECU: EDC17CP44 3L TDI. The engine code isn't vital as long as the ECU version is correct (displayed at the bottom row)
- Unplug the tool from your car and then plug it into your PC, load the software and press "download data" save the file to your PC.
-
At this point you have two options:
-
Method 1: Drag/drop your ECU read onto https://tunezilla.com/tuning This will decode the file and then allow you to select your tune options
- You may choose multiple files and will only be charged for the most expensive one. Proceed through the check out to pay for and download files. If you do not see the options you'd like, please create a ticket with a full break down of your modifications by pressing "request custom tuning"
-
Method 2: Create a ticket with a full break down of your modifications and tune request, attach your ECU read and any related data logs
- We will process the tuning and send you an invoice. If you have purchased software already, please let us know and provide a receipt.
- When you receive your ECU read, download that and load it into your device by pressing "upload data" It will prompt you to disconnect the device when complete
- Plug the device back into your car and go through the tuning menu, select the tune that you'd like to install
It will show an asterisk next to whichever file is currently installed
-
The radiator fan will run during ECU tuning, a charger or removing the fuse is highly recommended
- Turn the ignition on with the engine off to begin writing your tune, follow the prompts and it will show a progress bar while the tune is writing.
- Tune complete! enjoy responsibly