Tuning Solution for DQ381 with 401 Bootloader
After extensive testing TuneZilla is proud to release our solution for DSG equipped MK8 R and GTI models with the "locked" 401 Bootloader. This is a physical hardware change. By removing the mechatronic unit and swapping to our pre-flashed bootloader, users can enjoy more features not available from the factory.
The TuneZilla Bootloader will come preloaded with the following features and adjustments:
Torque Limiters Set 800nm
Two Step Launch Control 3000rpm No Kickdown / 3500rpm With Kickdown
Faster Launch Control Take Off Reaction
Displaying Gear Number In D/S Mode
Sailing Mode Off In Economic Mode
Upshift Off In Manual Mode
Modified Clutch Thermal Management
Optimized Clutch Cooling
Increased Max Shift Points In D/S Mode (Around 200rpm)
Max Clutch Pressure Values Up To 18-19bar
Reduced Up/Down Shift Times
Removed Safeguards That Slow Down Vehicle Acceleration Including TP (Throttle Plate) Closure above 6500RPM
Requires
Notes
This product is available for purchase via Tickets. Our Calibration team will confirm your Transmission compatibility before preparing your Bootloader. We recommend an experience mechanic/shop perform the installation.
TuneZilla supplies a pre-flashed Bootloader only. The following additional parts may be required for installation.
9x N 105 540 02 - mechatronic TTY bolts
1x 0GC 927 377 - seal for mechatronic connector
1x 0GC 325 201 L - outer cover for mech with integrated seal
4x N 910 327 02 - bolts for outer cover
1x N 909 654 01 - drain bolt/seal for mech
1x N 043 809 2 - seal for DSG drain plug
1x 0GC 325 183 A - DQ381 Filter
1x N 910 845 01 - O-ring for filter housing
6x G 055 529 A2 - DSG Fluid