All 3.0T Supercharged (EA837) tunes
At TuneZilla, we strive for an OEM level of drivability and reliability. Our team of Calibrators from around the world painstakingly work to deliver repeatable performance on all of our base maps. One of the major differences between our tunes and most of our competitors tunes is our linear OEM like throttle response. Where some software tuners increase throttle response to mask the actual output of their tunes by giving a very peaky feeling under acceleration, our tunes are designed to make the most usable and consistent power curve possible to maintain a strong pull without a heavy fall off midway through the power band. All while generating peak power as early as possible in the RPM range. Most off the shelf tunes advertise an attractive peak power figure, but suffer from a sudden drop in torque and a lower torque curve throughout the remainder of the RPM range.
Our Stage 1 tune for the EA837 3.0T engine awakens this Supercharged V6 and maximizes power output on stock hardware. Raising the RPM on this motor uncorks a much needed top end to increase peak horsepower and pull farther through the rev range.
- INCREASED REV LIMITER
- ADJUST TIMING TO OPTIMIZE HIGHER OCTANE FUEL
- INCREASE THROTTLE RESPONSE
- OPTIMIZED FUEL TRIM ADJUSTMENTS
Upgrade
Requirement
1 Step Colder Spark Plugs
Recommended
Upgraded Intake
Divorced coolant reservoir
Heat exchanger
Our Stage 2 tune for the EA837 3.0T engine optimizes the use of an upgraded pulley combination (single pulley, or dual pulley configurations) and increases the rev range as well as adjusting and optimizing fueling and timing. This tune will work well with a variety of pulley set ups.
93 Octane Fuel
Required
Supercharger Pulley (Single Or Dual Upgrade)
Divorced Coolant Reservoir
Heat Exchanger
Downpipes
This is a custom built tune that will require logging/dyno time. This tune is designed for heavily modified application - Ex. Ported/Upgrade Superchargers, Larger throttle body, etc
We understand that our end users have varying driving styles and build purposes, which is why we offer custom tune revisions on all of our base maps. By offering custom tuning to our customers, we can be sure you are getting the most out of your vehicle with your specific parts upgrades. Our base maps are tested in house with as many variables as possible to ensure even if you don’t want to customize your tune, your vehicle’s OEM sensors and adaptations will still be able to optimize our tunes to your region’s fuel and most off the shelf bolt on upgrades.
We believe it’s important for our customers to understand what is happening inside their engine so they can make informative decisions. Our LOG VIEWER automatically generates your vehicles data log .csv files into easy to read graphs which can then be viewed by our Calibrators to find areas of optimization on your vehicle. Not only can this data be used to optimize your tunes, but a lot of troubleshooting and diagnosing can be done by comparing requested data to actual data at a glance.
Custom Tuning starts at $1399. To get a more accurate cost on your custom tune, please create a ticket and tell us more about your build, and your specific modifications.
93 Oct / 98 RON
Spark Plugs
Required (Colder range)
Supercharger Pulley
Required (single or dual upgrade)
Throttle Body upgrade
Ported Supercharger
Auxiliary Cooling System
Heat Exchanger upgrade
DSG Tune
Clutch Upgrade (manual)
Downpipe upgrade
Due to the extensive upgrade requirements for Stage 3 tuning on this platform, we recommend you create a ticket with our calibration team prior to performing your upgrades.
The Stage Plus TCU tune for the ZF8HP is designed as a complimentary upgrade that can be paired with our Stage 1 ECU tune. It includes increased torque limits to accommodate the additional output from our ECU tune, along with revised transmission behaviour for improved responsiveness and drivability.
Customers looking for more comprehensive transmission tuning or additional TCU adjustments should select our full Stage 1 TCU tune instead of Stage Plus.
If the Stage Plus option is not available for your vehicle in InstaTune, you can request it through the TuneZilla Portal by following the prompts. Certain transmission box codes may not be immediately available.
Unlock the full potential of your vehicle’s performance with our TCU tune designed specifically for the ZF8HP transmission.
Our TCU tune is designed to enhance the overall driving experience by refining the factory transmission programming and delivering quicker, more responsive shifts. With revised shift points, reduced kickdown delays, increased torque limits, and shorter gear change times, the transmission responds more naturally to driver input while making better use of the engine's available power.
Whether cruising comfortably in Drive or pushing harder in Sport mode, the updated shift behaviour provides a more engaging and consistent feel across a range of driving conditions. We've focused on creating a well-rounded upgrade that improves both everyday drivability and performance without sacrificing the smooth operation that makes the ZF8HP such a capable transmission.
The result is a sharper, more responsive transmission that feels better suited to the vehicle's performance, whether you're putting together a refined daily driver, building a street sleeper, or getting the most out of a more extensively modified setup.
Increased Torque Limits
Recalibrated Shifting Points In Drive And Sport Modes
Reduced Delay In Kickdown Response During Acceleration
Shortened Gear Switch Duration
Removed The Stock Manual Button Bug