( NOTE: If your car is equipped with a simos 16.X ECU, it is not compatible with FZP )
At TuneZilla, we strive for an OEM level of drivability and reliability. Our team of Calibrators from around the world painstakingly work to deliver repeatable performance on all of our base maps. One of the major differences between our tunes and most of our competitors tunes is our linear OEM like throttle response. Where some software tuners increase throttle response to mask the actual output of their tunes by giving a very peaky feeling under acceleration, our tunes are designed to make the most usable and consistent power curve possible to maintain a strong pull without a heavy fall off midway through the power band. All while generating peak power as early as possible in the RPM range. Most off the shelf tunes advertise an attractive peak power figure, but suffer from a sudden drop in torque and a lower torque curve throughout the remainder of the RPM range.
Our Stage 1 tune for the EA837 3.0T engine awakens this Supercharged V6 and maximizes power output on stock hardware. Raising the RPM on this motor uncorks a much needed top end to increase peak horsepower and pull farther through the rev range.
- INCREASED REV LIMITER
- ADJUST TIMING TO OPTIMIZE HIGHER OCTANE FUEL
- INCREASE THROTTLE RESPONSE
- OPTIMIZED FUEL TRIM ADJUSTMENTS
Upgrade
Requirement
93 Oct / 98 RON
Required
DSG Tune
Recommended
Spark Plugs
Recommended colder range
Our Stage 2 tune for the EA837 3.0T engine optimizes the use of an upgraded pulley combination (single pulley, or dual pulley configurations) and increases the rev range as well as adjusting and optimizing fuelling and timing. This tune will work well with a variety of pulley set ups.
Required (Colder range)
Supercharger Pulley
Required (single or dual upgrade)
Highly Recommended
Downpipes
This is a custom built tune that will require logging/dyno time. This tune is designed for heavily modified application - Ex. Ported/Upgrade Superchargers, Larger throttle body, etc
We understand that our end users have varying driving styles and build purposes, which is why we offer custom tune revisions on all of our base maps. By offering custom tuning to our customers, we can be sure you are getting the most out of your vehicle with your specific parts upgrades. Our base maps are tested in house with as many variables as possible to ensure even if you don’t want to customize your tune, your vehicle’s OEM sensors and adaptations will still be able to optimize our tunes to your region’s fuel and most off the shelf bolt on upgrades.
We believe it’s important for our customers to understand what is happening inside their engine so they can make informative decisions. Our LOG VIEWER automatically generates your vehicles data log .csv files into easy to read graphs which can then be viewed by our Calibrators to find areas of optimization on your vehicle. Not only can this data be used to optimize your tunes, but a lot of troubleshooting and diagnosing can be done by comparing requested data to actual data at a glance.
Custom Tuning starts at $1399. To get a more accurate cost on your custom tune, please create a ticket and tell us more about your build, and your specific modifications.
Throttle Body upgrade
Ported Supercharger
Auxiliary Cooling System
Heat Exchanger upgrade
Clutch Upgrade (manual)
Downpipe upgrade
Due to the extensive upgrade requirements for Stage 3 tuning on this platform, we recommend you create a ticket with our calibration team prior to performing your upgrades.
Improve drivability of your vehicle with our TCU tune for the Audi 3.0TDI models equipped with the ZF 8 automatic transmission.
Our TCU tune recalibrates your transmission to give you better shift points and increased torque limits to properly handle the increase in power from your ECU tune.
Increased Torque Limit
Recalibrated shifting points in Drive and Sport modes
Quicker shifting response
Reduced kickdown delay for improved mid range acceleration
We are constantly learning from real world feedback and testing. After a year of real world use and customer feedback, we have developed two variations of TCU calibrations to cater to a wider range of driving styles. This update to the TCU catalog was an effort to reduce the amount of additional costs to customers who choose custom TCU tuning. Pulling from a variety of driving styles and customer requests, we have released an Autobahn tune, and a Nur-Spec tune.
Autobahn
Nur-Spec
The Autobahn calibration is for the long distance hyper-miler.
With shift points that are designed to keep you in the most efficient gear for maximum fuel efficiency, the Autobahn TCU file is great for highway commuters and long distance drivers who spend most of their time in the right lane maximizing their fuel range.
The Nur-Spec calibration is for the left lane passer and the weekend adventurer.
Adjusting the shift points to be more active and stay within a comfortable powerband for adventuring or left lane passing, the Nur-Spec TCU file is fantastic for those that like to have their vehicle ready to deploy torque at a moments notice with minimal downshifts.
Flash your vehicle in the comfort of your own driveway or garage using our TuneZilla Portal App and FlashZilla Pro dongle. Download your tune directly to your laptop and flash your vehicle anywhere.
Tune files can be modified through our InstaTune server so that you can upgrade your tune anytime.
For more information on how to use the FlashZilla Pro, you can see the guide here: Tuning with FlashZilla Pro